Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.
popularSuryasis posted Today 10:54 AM
popularSuryasis posted Today 10:54 AM

ASRock DeskMeet X600 Barebone 8lt Mini PC: AM5 Socket X600-ITX Motherboard, 4xDDR5 DIMM, 1xM.2 Gen5, 1x M.2 Gen4, 1xX16 Gen5, 2x SATA III, 500W PSU @ $190+ F/S

$190

Newegg
10 Comments 2,372 Views
Get Deal at Newegg
Good Deal
Save
Share
Deal Details
Link: https://www.newegg.com/asrock-des...6856158094

Spec:
  • 8 Liter compact size
  • Up to 54mm Height AM4/AM5 CPU Cooler Support
  • 500W Channel Well PSU (80+ Bronze, peak 550W)
  • Custom X600-ITX AM5 Motherboard with
  • Expansion Slots:
    • 4x DDR5 DIMM Slot (256GB Max, Up to 7200 MT/s OC)
    • 1x M.2 2230 Slot for Wi-Fi Card
    • 1x M.2 2280 PCIe Gen 5x4 Slot
    • 1x M.2 2280 PCIe Gen 4x4 Slot
    • 2x SATA3 6.0Gb/s ports
    • 1x PCIe X16 Gen 4 Slot (Supports a discrete Graphics card up to 20CM)
  • Connectors:
    • 1x Chassis Intrusion Header
    • 1x CPU Fan Connector (4-pin)
    • 1x Chassis/Water Pump Fan Connector (4-pin)
    • 1x 24 pin ATX Power Connector
    • 1x 8 pin 12V Power Connector
    • 1x Front Panel Header
    • 1x USB 2.0 Header (Support 2 USB 2.0 ports) (Supports ESD Protection)
  • Front I/O:
    • 1x Headphone/Headset Jack
    • 1x USB 3.2 Gen1 Type-C
    • 2x USB 3.2 Gen1 Type-A
    • 2x USB 2.0 Type-A
  • Rear I/O:
    • 2x DisplayPort 1.4
    • 1x HDMI
    • 2x USB 2.0 Type-A
    • 2x USB 3.2 Gen1 Type-A
    • 1x RJ-45 LAN Port
    • BIOS Flashback Switch
    • HD Audio Jacks: Line in / Front Speaker / Microphone
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Link: https://www.newegg.com/asrock-des...6856158094

Spec:
  • 8 Liter compact size
  • Up to 54mm Height AM4/AM5 CPU Cooler Support
  • 500W Channel Well PSU (80+ Bronze, peak 550W)
  • Custom X600-ITX AM5 Motherboard with
  • Expansion Slots:
    • 4x DDR5 DIMM Slot (256GB Max, Up to 7200 MT/s OC)
    • 1x M.2 2230 Slot for Wi-Fi Card
    • 1x M.2 2280 PCIe Gen 5x4 Slot
    • 1x M.2 2280 PCIe Gen 4x4 Slot
    • 2x SATA3 6.0Gb/s ports
    • 1x PCIe X16 Gen 4 Slot (Supports a discrete Graphics card up to 20CM)
  • Connectors:
    • 1x Chassis Intrusion Header
    • 1x CPU Fan Connector (4-pin)
    • 1x Chassis/Water Pump Fan Connector (4-pin)
    • 1x 24 pin ATX Power Connector
    • 1x 8 pin 12V Power Connector
    • 1x Front Panel Header
    • 1x USB 2.0 Header (Support 2 USB 2.0 ports) (Supports ESD Protection)
  • Front I/O:
    • 1x Headphone/Headset Jack
    • 1x USB 3.2 Gen1 Type-C
    • 2x USB 3.2 Gen1 Type-A
    • 2x USB 2.0 Type-A
  • Rear I/O:
    • 2x DisplayPort 1.4
    • 1x HDMI
    • 2x USB 2.0 Type-A
    • 2x USB 3.2 Gen1 Type-A
    • 1x RJ-45 LAN Port
    • BIOS Flashback Switch
    • HD Audio Jacks: Line in / Front Speaker / Microphone

Community Voting

Deal Score
+7
Good Deal
Get Deal at Newegg

Leave a Comment

Unregistered (You)

10 Comments

Sign up for a Slickdeals account to remove this ad.

Original Poster
Pro
Expert
This user is an Expert in Computers
Today 03:13 PM
19,925 Posts
Joined Jul 2015
Today 03:13 PM
SuryasisToday 03:13 PM
Original Poster
Pro
Expert
This user is an Expert in Computers
19,925 Posts
Want to highlight couple of points here: -
  • The Price is really very attractive for the whole combo.
  • The motherboard has mini-ITX form factor but a custom design. Normally mini-ITX boards come with 2 DIMM slots. Here AsROCK created this custom design to accommodate 4xDIMM slots but reduced the number of SATA ports to 4 from normal 4.
  • As per the reviews I have checked, with a decent aftermarket low profile cooler, it provides pretty good thermal during gaming with 8 Core parts.
  • The PSU is standard ATX form factor can be replaced easily.
1
Pro
Today 03:42 PM
1,552 Posts
Joined Jul 2009
Today 03:42 PM
paliknight
Pro
Today 03:42 PM
1,552 Posts
Quote from Suryasis :
Want to highlight couple of points here: -
  • The Price is really very attractive for the whole combo.
  • The motherboard has mini-ITX form factor but a custom design. Normally mini-ITX boards come with 2 DIMM slots. Here AsROCK created this custom design to accommodate 4xDIMM slots but reduced the number of SATA ports to 4 from normal 4.
  • As per the reviews I have checked, with a decent aftermarket low profile cooler, it provides pretty good thermal during gaming with 8 Core parts.
  • The PSU is standard ATX form factor can be replaced easily.
SATA reduced from 4 to 2 but the board supports 2 NVMe drives so not too bad.
Today 04:23 PM
25 Posts
Joined Jul 2016
Today 04:23 PM
iphone17probuybuybuyToday 04:23 PM
25 Posts
The PSU will unable any coolers taller than the stock wraith cooler if you even got one from the 9600x or others. Big warning. The PSU is ****.
Today 04:24 PM
950 Posts
Joined May 2008
Today 04:24 PM
SkidpalaceToday 04:24 PM
950 Posts
What's the cheapest reasonable AM5 CPU that would give decent workstation results, or light gaming?
Today 04:36 PM
620 Posts
Joined Aug 2017
Today 04:36 PM
reronToday 04:36 PM
620 Posts
Had me interested until I saw this:
" 1x PCIe X16 Gen 4 Slot (Supports a discrete Graphics card up to 20CM)"

Basically a single slot GPU. But you're probably using integrated graphics/APU with this case

Google says: a typical "2 slot" card is about 40 mm thick, and a 2.5 slot card will be slightly thicker, around 50-60 mm
Today 04:45 PM
36 Posts
Joined Jan 2014
Today 04:45 PM
snowbeadToday 04:45 PM
36 Posts
I have a deskmini which is a smaller version of these. I was looking at these for gaming. The Asrock Deskmini/Deskmeet series custom motherboards have random hang problems because inconsistent gpu voltage. it's hard to change to a standard MB from different vendor since they customize the MBs to fit these cases though the Form factor is standard. (ports not accessible/no way run cables because of tight fit etc.) Beware of buying this and please do your research.
Today 04:54 PM
166 Posts
Joined Oct 2011
Today 04:54 PM
lostindarkToday 04:54 PM
166 Posts
Quote from reron :
Had me interested until I saw this:" 1x PCIe X16 Gen 4 Slot (Supports a discrete Graphics card up to 20CM)"Basically a single slot GPU. But you're probably using integrated graphics/APU with this caseGoogle says: a typical "2 slot" card is about 40 mm thick, and a 2.5 slot card will be slightly thicker, around 50-60 mm
The 20CM is the length. The case have a 2 slot design, not sure if fits 2.5 slot card though.

Update, according to Gemini:
Yes, a 2.5 slot graphics card will fit in the ASRock DeskMeet X600. The DeskMeet X600 supports dual-slot graphics cards with a maximum length of 20cm (7.87 inches), according to ASRock. A 2.5 slot card is technically within this limit, but it might be a tight fit depending on the specific card's dimensions, especially in terms of length.

Sign up for a Slickdeals account to remove this ad.

Today 05:00 PM
90 Posts
Joined Jul 2014
Today 05:00 PM
MaartenTToday 05:00 PM
90 Posts
I would have definitely jumped on this if the seller wasn't Newegg. What a terrible company.

Edit: I apologize to the person below me. I was not aware I could not complain. maybe I have a reason to complain about this company? if so; would it not be a damn shame to not voice my opinion about it? same as we rely every single day on Slickdeals for other users to not just use the website for their benefits but also to share their experiences and their deals!
Last edited by MaartenT August 6, 2025 at 10:13 AM.
Today 05:04 PM
931 Posts
Joined Oct 2016
Today 05:04 PM
SlicksaleToday 05:04 PM
931 Posts
Quote from MaartenT :
I would have definitely jumped on this if the seller wasn't Newegg. What a terrible company.
stop complaining, at least they are located in California and they have a physical store to return in case you don't like how it performs, can't say the same thing if you buy something from Temu
Original Poster
Pro
Expert
This user is an Expert in Computers
Today 05:15 PM
19,926 Posts
Joined Jul 2015
Today 05:15 PM
SuryasisToday 05:15 PM
Original Poster
Pro
Expert
This user is an Expert in Computers
19,926 Posts
Quote from reron :
Had me interested until I saw this:" 1x PCIe X16 Gen 4 Slot (Supports a discrete Graphics card up to 20CM)"Basically a single slot GPU. But you're probably using integrated graphics/APU with this caseGoogle says: a typical "2 slot" card is about 40 mm thick, and a 2.5 slot card will be slightly thicker, around 50-60 mm
You are confusing length with width. That is 20 "Centimeter" or 200 millimeter length and you are checking width which is 50-60 millimeter.

Leave a Comment

Unregistered (You)

Popular Deals

View All

Trending Deals

View All