Amazon has
Casio Men's Black Analog Digital Multi-Function Watch on sale
from $19.99.
Shipping is free w/ Prime or on $25+ or $35+ orders (minimum requirement varies by location)..
Thanks to community member
dealgate for sharing this deal
Available:
Features:
- 100 M Water Resistance
- World Time (31 different Time Zones, and 48-cities) w/ Daylight Saving on/off & home city/world time city swapping
- 1/100-second stopwatch (Measuing capacity: 23:59'59.99")
- Countdown Timer (Measuring Unit: 1/10 Second)
- 5 Daily or One-Time alarms
- Hourly Time Signal
- Auto-calendar out until the year 2099, the watch does not have to be adjusted for the number days in month even leap year until 2099
- LED light w/ Selectable illumination duration & afterglow
- Resin Glass
Top Comments
On another note. I know that there are "kits" for these to make them "full metal" (alchemist...sorry I had to). I will tell you what I did, I purchased a Black one (usually the cheapest one) and then I went on to Temu and got a silver/stainless AND a Black metal SKMEI and now that allows me to change the watch to whatever type I want (say if you want to dress it up a little to what you're wearing). The SKMEI were VERY cheap when I got them ($2 each) however I am almost certain the prices of the knockoff SKMEIs have also gone up. So it might not be worth it to some, not only for the knockoff price being raised but due to the small amount of time it takes to swap the watch cases and/or bands for your preference. I also took time to clean up the SKMEIs (and the original Casio) and remove the excess (imo) lettering on the outside AND the inside Black divider. I used a pencil eraser (a white one mostly as it's less abrasive but also a pink one) to remove the words from the places I wanted (I like the outside to be completely clean and I removed the red lettering and the WR part from the inside).
If you do what I did (I'd not recommend using rubbing alcohol/goo gone as it might strip the finish...being too rough with the eraser on the outside will too. You can also look up YouTube videos on it btw) just be careful around the mini dial on the inside, to make sure you align it correctly after removing the letters on the inside, and make sure no dust/eraser shavings are on the inside before putting it all back together. 1 watch with 3 straps/bands (if you include the rubber one) and you technically can use the SKMEI as a beater (don't care of it gets scratched) if you get the Black metal as you really only need to swap the band compared to stainless/silver needing to swap the inside module.
Sorry that was a lot but I do like the watch especially for the price, look, and features reasons.
30 Comments
Sign up for a Slickdeals account to remove this ad.
On another note. I know that there are "kits" for these to make them "full metal" (alchemist...sorry I had to). I will tell you what I did, I purchased a Black one (usually the cheapest one) and then I went on to Temu and got a silver/stainless AND a Black metal SKMEI and now that allows me to change the watch to whatever type I want (say if you want to dress it up a little to what you're wearing). The SKMEI were VERY cheap when I got them ($2 each) however I am almost certain the prices of the knockoff SKMEIs have also gone up. So it might not be worth it to some, not only for the knockoff price being raised but due to the small amount of time it takes to swap the watch cases and/or bands for your preference. I also took time to clean up the SKMEIs (and the original Casio) and remove the excess (imo) lettering on the outside AND the inside Black divider. I used a pencil eraser (a white one mostly as it's less abrasive but also a pink one) to remove the words from the places I wanted (I like the outside to be completely clean and I removed the red lettering and the WR part from the inside).
If you do what I did (I'd not recommend using rubbing alcohol/goo gone as it might strip the finish...being too rough with the eraser on the outside will too. You can also look up YouTube videos on it btw) just be careful around the mini dial on the inside, to make sure you align it correctly after removing the letters on the inside, and make sure no dust/eraser shavings are on the inside before putting it all back together. 1 watch with 3 straps/bands (if you include the rubber one) and you technically can use the SKMEI as a beater (don't care of it gets scratched) if you get the Black metal as you really only need to swap the band compared to stainless/silver needing to swap the inside module.
Sorry that was a lot but I do like the watch especially for the price, look, and features reasons.
Arguably the best Casio ever made. I always wear mine when I travel.
Unlike the stainless steel, this adjusted to fit out of the box without tools.
Sign up for a Slickdeals account to remove this ad.
https://www.fossil.com/en-us/watc...id/?page=1
https://www.fossil.com/en-us/watc...id/?page=1
Sign up for a Slickdeals account to remove this ad.
If so, then definitely a cool mod